Auto-zone-control-systems USB-Link 2 Technical Guide, Installation Instructi Bedienungsanleitung PDF herunterladen (Seite 7)

USB-Link 2

Technical Guide

Finding What COM Port Number the

USB-Link 2 is Using

1. Left-click on <Start>, located on the bottom left of the

Windows toolbar. Select <Control Panel>. Double-click

the <System> icon.

2. Click the <Hardware> tab. Click the <Device

Manager> button.

3. Click on the plus sign next to Ports to see all of the COM

ports.

4. Locate the USB Serial Port (COM#). The COM# in

parentheses is the port it is located on. Write this COM port

number down. You will need to know this when setting up

the Prism 2 software.

5. If the COM port number is 10 or greater, go to

“Changing the USB COM Port Number” in the

Troubleshooting section on page 12; otherwise,

continue with the section “Prism 2 Setup” on page 8.

Finding the COM Port Number

1 2 3 4 5 6 7 8 9 10 11 12 ... 18 19

Keine Kommentare

Auto-zone-control-systems USB-Link 2 Technical Guide, Installation Instructi Bedienungsanleitung Seite 7